1st fire on briggs engine after 1½ years of sitting

I HATE PLASTIC CARBS, it's a piece of shit, primed the carb 3 times and pulled the rope 7 times and got nothing, took the air cleaner off primed the carb 3 times and it wasn't getting any gas in the carb, so i kept priming it 50 times and still got nothing, according to dave' saying on his video on davidsfarm, "PUMP IT" SO I had to use air compressor and add air in the tank using the vent hole on the gas cap and used air in the tank and pump the carb primer more than 100 times with air assist and it finally got gas, the choke-o-matic starts up with no problem even if they sat for more than 3 years, it will choke the carb and it will fore that briggs engine u within 3 to 5 times on the rope start, stupid dinka donka generalee31184 left a comment about the choke-o-matic on my other video" MTD lawn mower cold start after winter storage", here what he said: generalee31184: You guys are nuts. Old choke-o-matic are junk!!! try working on them everyday you will see what is junk. hahaha, he's an idiot, when the plastic carb goes bad, it cannot be rebuilt, they has to be replaced, and they cannot be dipped in the carburetor cleaner, as it can ruin the plastic, aluminum carbs you can, and much easier to maintained, replace the needle valve and diaphram, and put it back together and it will run like new, so generalee31184, screw off, i prefer the choke-o-matic on my mowers than plastic carbs, don't like it, go play super slide in traffic and get it on video you retard :P
Video Rating: 4 / 5